行政院環境保護署 環保專案成果報告查詢系統

108

5,450 千元

2019/04/22

2019/12/31

杜敬民

環檢所

鄧名志

財團法人工業技術研究院

環境監測及檢測

工業區、污染溯源、數據解析

Industrial Area, Pollution Forensics, Data Analysis

許心蘭

林聖杰

03-5732939#

ShenCheihLin@itri.org.tw

工業區污染物鑑識技術報告架構將以實際於觀音工業區執行代表行業別及廠家所排放之廢水、廢棄物及空氣等污染物特徵歸納分析，與以污水處理廠為受體之水污染溯源鑑識結果作示範案例。進一步評估與草擬可廣泛應用於相關工業區之污染物鑑識技術作業程序流程並輔以相關工業區污染源鑑識技術文獻資料包括污染物調查、污染源鑑識、統計模式及未知物研析技術等作為參考。藉由實際以觀音工業區做為示範對象，內容自初始之工業區各項背景資料蒐集、目標調查廠家篩選、採樣相關期程與注意事項規劃至實際前往現地訪查、樣品採集與檢測分析，乃至最後之統計模式解析。 鑑識成果以水污染溯源方法為主體，分別使用不同受體模式統計批次性及連續性採集觀音工業區污水處理廠調勻池水體，與已知潛在污水排放源特徵進行比對，觀察兩模式針對受體端之污染組成貢獻比例推估結果之相關性。同時以多變量統計方法歸納不同代表行業別之廠家廢棄物主體特徵，並進一步以廠家製程觀點辨認不同製程間廠家廢棄物特徵差異，建製觀音工業區廠家廢棄物排放特徵相關辨認資訊。

工業區、污染溯源、數據解析

本文(定稿本)_觀音工業區_20191225.pdf

12MB

期末報告(定稿本)本文

2020/1/31 上午 12:00:00

Industrial area pollutant identification technology report structure will be based on the actual implementation of Guanyin industrial zone to represent the characteristics of pollutants such as waste water, waste and air discharged by industries and manufacturers, and water pollution source identification with sewage treatment plants as the receiver The result is a demonstration case. Further evaluation and drafting of the procedures for the identification of pollutants in the relevant industrial areas can be widely used, supplemented by relevant industrial area pollution source identification technology documents, including pollutant investigation, pollution source identification, statistical models, and unknown object analysis technology. With the actual use of the Guanyin Industrial Zone as a demonstration object, the content ranges from the initial collection of various background data of the industrial zone, selection of target survey manufacturers, sampling related schedules and precautions to actual site visits, sample collection, and testing and analysis. And even the final statistical model. The identification results are based on the method of traceability of water pollution, using different receptor models to collect batch and continuous statistics. The water body of the Guanyin Industrial Zone Sewage Treatment Plant was homogenized and compared with the characteristics of known potential sewage discharge sources. Correlation of the results of the estimation of the contribution of the pollution composition at the acceptor end. At the same time, the multivariate statistical method is used to summarize the main characteristics of wastes of manufacturers representing different industries, and to further identify the differences in the characteristics of wastes among different processes from the viewpoint of the manufacturing process of the manufacturers.

Industrial Area, Pollution Forensics, Data Analysis